Skip to main content

Butter Bot says "Camera failure, shutting down" — what should I do?

It is a fault in the camera hardware, not something you did: rule out a flat battery once, leave the head closed and send us a short video.

A
Written by Albert Gajsak

What it means. If Butter Bot says "Camera failure, shutting down" and switches itself off, its camera has a hardware fault. It isn't something you caused, and resetting it or restoring its software won't clear it, so there's nothing for you to repair at your end.

One quick check. If the battery could be flat, charge Butter Bot fully with a USB-C charger, then hold the power button for about 3 seconds. The power button is the small centre part of the camera, around the lens, not the outer ring. If you still hear "Camera failure", stop there: no more testing is needed.

Please don't open the head. Don't prise off the face plate or try to reseat the camera cable. The head isn't built to come apart, and you'd be more likely to damage something getting in there.

Other camera problems

  • No picture on the controller, or the camera doesn't seem to work: check the two are connected (How do I connect Butter Bot to its controller?), then update Butter Bot's software. If that doesn't help, it's a hardware fault.

  • A very pixelated or red picture, or dark lines when you touch Butter Bot: this points to a loose connection inside the camera, which is a hardware fault too.

  • The camera won't press in, or sticks: that's a fault on our side as well.

  • The camera feels warm: that's its normal running temperature, and it won't cause any damage.

Getting it sorted. A faulty camera is covered by our warranty: see Do your kits have a warranty? Message us here, or email [email protected] with your order or backer number and a short video of what happens when you switch Butter Bot on, and a colleague will sort out the next step with you.

Did this answer your question?