Skip to main content

Clockstar 2.0 is a kit — what is in the box and what you assemble

Clockstar 2.0 arrives as parts you assemble yourself in about an hour; here is exactly what the box contains.

P
Written by Patricia Mršić

Clockstar 2.0 is a build-it-yourself kit. It arrives as parts and you assemble the watch before you can wear it.

The box contains:

  • Acrylic casings

  • Watch strap

  • Li-Po battery

  • Main circuit board

  • Screws

Assembly takes around an hour and needs no previous experience with electronics or building kits.

Three sets of instructions cover the kit: a Build Guide with more than 100 step-by-step photos, a Usage Guide and a Coding Guide. All three are on the Clockstar 2.0 product page and on our Resources page at circuitmess.com/blogs/resources.

If you wanted a finished watch. The NASA Artemis Watch 2.0 ships fully assembled — charge it with the included cable and use it straight away — and it is programmable too. If a Clockstar has arrived and it is not what you expected, message us here, or email [email protected], with your order number. If you live in the United States, Canada, the United Kingdom, Australia, New Zealand, Saudi Arabia, the EU, Norway, Iceland or Liechtenstein, you can return it within 14 days of receiving it. Leave the box sealed if you can: opened kits are refunded with a 30% reduction. The full rules are in What is CircuitMess' refund policy?

Did this answer your question?